Elation Professional 700 II - Manual (Page 14)

Power Spot 700 II™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 14
7. 5-PIN DMX Output Jack (CMY Version Only) – This 5-Pin XLR jack is used to
send an outgoing DMX signal. For best results this jack should be terminated if it
is the last fixture in a DMX daisy-chain (see termination on page 20).
8. 5-Pin DMX Input Jack (CMY Version Only) - This 5-Pin XLR jack is used to
receive an incoming DMX signal.
9. Microphone Sensitivity Adjustment Knob – This knob is used to adjust the
frequency sensitivity of the internal microphone when operating in “audio” mode.
When the knob is turned counter-clockwise the unit is less sensitive to sound.
When the knob is turned clockwise the unit is more sensitive sound.
10. Built-In Microphone – The built-in microphone is used to pick-up sound impulse
that are used to chase the built-in programs in Sound-Active control.
11. Firmware Connection – This connector is for use by an authorized technician
only. This connector is used to upgrade the operating software and to test the
fixture.
12. 3-PIN DMX Output Jack – This 3-Pin XLR jack is used to send an outgoing DMX
signal. For best results this jack should be terminated if it is the last fixture in a
DMX daisy-chain (see termination on page 14).
13. 3-PIN DMX Input Jack – This 3-Pin XLR jack is used to receive an incoming
DMX signal.
14. Carrying Handle – The fixtures includes two built-in carrying handles. Be sure to
always handle the fixture by the built-in carrying handles. Never lift or carry the
fixture by the head or retaining arms as this could cause serious damage to the
fixture and void your manufactures warranty.
15. Power Switch – The switch is used to control main power to fixture’s electronics.
16. Lamp Fuse Holder – This housing holds a 250v/10A GMA fuse (120v operation).
Never defeat this fuse. This fuse is designed to protect the lamp in the event of
severer power fluctuations. In the event of fuse failure, always be sure to replace
this fuse with an exact match unless otherwise instructed by an authorized Elation
technician.