Elation Professional 700 II - Manual (Page 59)

Power Spot 700 II™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 59
15. MAINTENANCE AND CLEANING
It is absolutely essential that the fixture is kept clean and dust, dirt and smoke-fluid
residues do not built-up on the surface or within the fixture. Residue build-up may cause
the fixture's light output to be significantly reduced. Regular cleaning will not only ensure
the maximum light output, but will also allow the fixture to function reliable throughout its
life.
A soft lint-free cloth moistened with any quality glass cleaner is recommended,
under no circumstances should alcohol or solvents be used! Stay away from glass
cleaner that contains ammonia such as Windex.
The inside optical system should be maintained only by qualified technicians. Please
contact Elation professionals for recommendation associated with internal cleaning
procedures.
Safety Considerations:
• Always disconnect main power before attempting any service related issues!
• Allow ample time for the lamp to cool (at least 20 minutes) before performing
any cleaning procedures.
• Never attempt operation with any of the protective covers removed!
Cleaning Frequency (rule-of-thumb)
The residue build up will very depending on location, therefore only general
guidelines are given. Below is a suggested cleaning interval only. Cleaning frequency
depends on the environment in which the fixture operates (I.E. smoke, fog residue,
dust, dew). In clubs that observe heavier use, we recommend cleaning on a more
frequent basis. Periodic cleaning will ensure fixture longevity and crisp lamp output.
Position Interval In this way
Outside optic Weekly Soft cloth and glass cleaner
Color filter Monthly Soft cloth and glass cleaner
Gobos Yearly Vacuum cleaner, airbrush, etc.
Glass gobos Monthly Soft cloth and glass cleaner
Prism Monthly Soft cloth and glass cleaner
Dimmer/Shutter Yearly Vacuum cleaner, airbrush, etc.