Elation Professional 700 II - Manual (Page 52)

Power Spot 700 II™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 52
2x
Data Bus
4) Loosen the two locking thumbscrews on the left and right side of the optical
effects module (please do not attempt to remove the thumbscrews completely).
Once the thumbscrews have been loosened push them inwards towards the
center of the head while gently pulling the effects module straight out. You may
use the metal support plates to grasp and pull the effects module out. See the
illustration below;
Attention: The effects module reset between two lateral tracks. A moderate
effort is normal when attempting to remove the unit. Never use any of the
sensitive wheel components like the gobo and color wheels or any cables to
remove the module. Use the metal support plates or the stepper motors as a