Elation Professional 700 II - Manual (Page 23)

Power Spot 700 II™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 23
8. FIXTURE MENU
The control panel located on the side of the fixture allows you to
access the main menu and make all necessary adjustments to the
POWER SPOT 700™. During normal operation, tapping the
“MODE” key once will access the fixture’s main menu. Once in the
main menu you can navigate through the different functions and
access the sub-menus with the Up and Down buttons. Once you
reach a field that requires adjusting, tap the ENTER button to
activate that field and use the UP and Down button to adjust the
field. Tapping the Enter button once more will confirm your setting.
Once a setting is saved the LED will briefly readout OK to confirm
a new setting has been made and locked into memory. You may
exit the main menu at any time without making any adjustments by
tapping the MODE button.
MO DE ENT ER UP DO WN
MODE ENTER UP DOWN
UP MODE ENTER DOWN
Display
Level
1
Level
2
Level
3
Remark
D001 Define the DMX start address
TEST Test program of all functions
AUDI ASLW Self-running audio program (slow)
AFST Self-running audio program (fast)
MSTR Master for the audio program
SVPT Basic position for the audio program
SIZE Size for the audio program (NORM-BIG-MIDL-
SMAL)
LAMP Switch on/of the lamp direct at the Power Spot 700
RESE Reset
TIME POWR Running time of the fixture (no destructible)
LA1 Running time of the lamp (erasable)
LA2 Running time of the lamp (no destructible)
RPAN Reverse Pan-direction
RTLT Reverse Tilt-direction
DMOD NORM DMX Mode: Defines the number of DMX channels
EXT DMX Mode NORM has to be selected at the
moment.
SPEC MANU Manual drive of all device functions
LAAU Automatic lamp start
DLOF Switch off lamp via DMX
DMXI Reed out actual DMX-values
DISP D ON Display On/Off
REV Twist the display (also pushing Up/Down keys at
the same time)
LHEA Function not yet in use
LBAS Function not yet in use

DOWN
- UP

TEMP Internal Temperature Reading