Enviro EA800 User Manual
Page 33
Installation
D-011-0152
29
3.
Enter the
SYSTEM menu and then select the CONFIGURATION menu as shown below.
:
4.
The default date format is MM/DD/YYYY. If you prefer DD/MM/YYYY format, from the
CONFIGURATION menu,
set the
DATE FORMAT as appropriate for your region.
5.
Press F3 to confirm your selection. When the
CONFIGURATION menu is displayed, skip TIME FORMAT if you want
to use the default time format of 24-hour clock. If you prefer a 12-hour AM/PM clock, set the time format as
follows:
:
6.
Press F3 to confirm your selection. When the
CONFIGURATION menu is displayed, select and set
COLLECTION FREQUENCY as shown below. Collection Frequency determines how often the base unit collects
data from the sensors.
F3
Choose setting for your region.
F3
Choose setting for your region.