Enviro EA800 - Manual (Page 66)

62 D-011-0152
Changing the Buzzer Setting
Changing the Buzzer Setting
Note: Update the system’s Configuration Worksheets to document any changes.
Note: The default buzzer configuration is ENABLED and the active condition of the on-board buzzer mirrors what
is assigned to the Auxiliary Relay.
To change the buzzer setting perform the following procedure:
WARNING !
Changing the buzzer setting to DISABLED turns off the audible alarm tone from
the base unit. Do not disable the buzzer unless you are sure you do not want the
base unit to emit an audible tone when an alarm occurs. The active condition of
the buzzer mirrors what is assigned to the auxiliary relay.
Unlock the EA800 as shown
in “Locking and Unlocking
the EA800” on page 55
F3