Extron electronic MAV Plus - Manual (Page 131)

6-7 CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
PRELIMINAR
Y
Date/Time Settings fi elds
The Date/Time Settings fi elds (fi gure 6-5) provide a location for viewing the time
functions and two methods for setting the time.
Figure 6-5 — Date/Time Settings fi elds
To sync the BME’s clock to the connected PC, simply click the Local Date/Time
button and then click the Submit button.
N Use of the Local Date/Time button has no effect on the Zone and Daylight
Savings Time functions.
For more complete control of the date and time settings, change the settings as
follows:
1. Click the desired variable’s drop box. The adjustable variables are month,
day, year, hours, minutes, AM/PM, and (time) zone. A drop down scroll box
appears (the year drop box is selected in fi gure 6-5).
2. Click and drag the slider or click the scroll up button or scroll down
button until the desired variable is visible.
3. Click the desired variable.
N If setting the time, set the local time. The Zone variable allows you to then enter
the offset from Greenwich Mean Time (GMT).
N The Zone fi eld identifi es the standard time zone selected and displays the
amount of time, in hours and minutes, that the local time varies from the GMT
international time reference.
4. Repeat steps 1 through 3 for other variables that need to be changed.
5. If appropriate, click the Daylight Savings radio button to turn on the daylight
savings time feature.
N When daylight savings time is turned on, the switcher automatically updates
its internal clock between Standard Time and Daylight Savings Time in the
spring and fall, on the date that the time change occurs in the selected country or
region. When Daylight Savings Time is turned off, the switcher does not adjust
its time reference.
6. Click the Submit button.