Extron electronic MAV Plus - Manual (Page 57)

3-27 CrossPoint 450 Plus and MAV Plus Switchers • Operation
PRELIMINAR
Y
2. Press and hold the Preset button for approximately 2 seconds until it blinks
(fi gure 3-41).
PRESET PRESET
17 18 19
1 2 3
I
N
Press and hold the Preset button until it blinks.
2 seconds
= Blinking button
All input buttons with assigned presets light red.
If you then save the configuration to a lit preset number,
the configuration data at that preset location will be overwritten.
Red
(Preset Assigned)
Unlit
(No Preset Assigned)
Figure 3-41 — Enter Save Preset mode
3. Press and release the input or output button for the desired preset
(fi gure 3-42).
C O N T R O L
PRESET ENTER ESC VIEW
17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8
25
9
I
N
The Enter button blinks to
indicate the need to save the
preset.
The Preset button continues
to blink.
= Blinking button
Press and release the Input 1 button.
The button blinks red to indicate that this
preset number is selected but not saved.
Figure 3-42 — Select the preset
4. Press and release the Enter button (fi gure 3-43). The current confi guration is
now stored in the selected memory location.
C O N T R O L
PRESET ENTER ESC VIEW
The Enter and Preset
buttons return to unlit or
background illumination.
Press the Enter button to
save the preset.
All input buttons and output
buttons return to unlit or
background illumination.
Figure 3-43 — Press the Enter button