Extron electronic MAV Plus - Manual (Page 74)

Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Operation 3-44
PRELIMINAR
Y
Perform a soft reset of the switcher as follows:
1. Press and hold the Reset button until the Reset LED blinks once (events reset),
twice (system reset), or three times (absolute reset) (fi gure 3-70).
RESET
Rx
RESET RESET
RESET
Rx
RESET RESET
RESET
Rx
RESET
RESET
RESET
RESET RESET
Press and hold
the Reset button.
Release, then
immediately
press and hold.
3 seconds
Events Reset
IP Settings
Reset
Reset LED
flashes once.
1
Press and hold
the Reset button.
Release, then
immediately
press and hold.
3 seconds
Reset LED
flashes twice. 2
Absolute
Reset
Press and hold
the Reset button.
Release, then
immediately
press and hold.
3 seconds
Reset LED
flashes three
times.
Release the
Reset button.
Release the
Reset button.
Release the
Reset button.
3
Reset LED
flashes three
times.
3
Reset LED
flashes three
times. 3
Reset LED
flashes three
times.
3
Figure 3-70 — Whole switcher and absolute resets
2. Release the Reset button and then immediately press and hold the button
until the LED fl ashes three times. Release the Reset button. Nothing happens
if the second momentary press does not occur within 1 second.