Extron electronic MAV Plus - Manual (Page 156)

CrossPoint 450 Plus and MAV Plus Switchers • Reference Information B-2
Reference Information
PRELIMINAR
Y
CrossPoint 450 Plus Specifi cations
Video
Routing ........................................... 64 x 64, 64 x 48, 64 x 32, 48 x 64, 48 x 48, 48 x 32, 32 x 48, or 32 x 64 matrix
Gain ................................................. Unity
Bandwidth ...................................... 450 MHz (-3 dB), fully loaded
0 - 10 MHz: no more than +0.1 dB to -0.1 dB
0 - 130 MHz: no more than +1.0 dB to -1.0 dB
Crosstalk ......................................... -80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz
Switching speed ............................ 200 ns (max.)
Video input
Number/signal type ..................... 32, 48, or 64 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video
Connectors ..................................... 32, 48, or 64 BNC female
Nominal level ................................ 1 Vp-p for Y of component video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video and C of S-video
Minimum/maximum levels ........ Analog: 0.5 V to 2.0 Vp-p with no offset
Impedance ...................................... 75 ohms
Horizontal frequency .................... 15 kHz to 150 kHz
Vertical frequency .......................... 30 Hz to 150 Hz
Return loss ...................................... -30 dB @ 5 MHz
DC offset (max. allowable)........... 1.5 V
Video output
Number/signal type ..................... 32, 48, or 64 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video
Connectors ..................................... 32, 48, or 64 BNC female
Nominal level ................................ 1 Vp-p for Y of component video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video and C of S-video
Minimum/maximum levels ........ 0 V to 2.0 Vp-p (follows input)
Impedance ...................................... 75 ohms
Return loss ...................................... <-30 dB @ 5 MHz
DC offset ......................................... ±5 mV with input at 0 offset
Switching type ............................... Triple-Action
™
Sync
Input type ....................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................... RGBHV, RGBS, RGsB, RsGsBs (follows input)
Input level ...................................... 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
Output level ................................... AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated
Input impedance ........................... Inputs 1 to 16: 75 or 510 ohms, switchable
Inputs 17 to 32, 48, or 64: 510 ohms
Output impedance ........................ 75 ohms
Max. propagation delay ............... 30 ns
Max. rise/fall time ........................ 4 ns
Polarity............................................ Positive or negative (follows input)
Audio — See MAV Plus Specifi cations (page B-4)
Audio input — See MAV Plus Specifi cations (page B-4)
Audio output — See MAV Plus Specifi cations (page B-4)