Extron electronic MAV Plus - Manual (Page 52)

Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Operation 3-22
PRELIMINAR
Y
Example 5: Grouping inputs and outputs
In the following example, several switcher inputs and outputs are assigned to
groups. The steps show the front panel indications that result from your action.
1. Press and release the Esc button (fi gure 3-29).
C O N T R O L
PRESET ENTER ESC VIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 3-29 — Clear all selections
2. To enter I/O Group mode, press and hold the Input 1 and Output 1 buttons
(fi gure 3-30).
1
1
17 18 19
1 2 3
I
N
17 18 19
1 2 3
O
U
T
Press and hold the Input 1 button and Output 1 button.
Release the Input 1 button
and Output 1 button.
Ungrouped input and
output buttons light.
2 seconds
Figure 3-30 — Select I/O Group mode
3. Press and release the Enter button to select group 1 (fi gure 3-31).
C O N T R O L
PRESET ENTER ESC VIEW
Press and release the Enter button to select group 1.
The button lights amber to indicate the selection.
1 3 2 4 Group #
Figure 3-31 — Select an I/O group