Silvercrest SSR 1080 A1 - Manual (Page 26)

Digital HD Satellite Receiver SSR 1080 A1
English - 24
Multi Satellite Search
Satellite
Overview of all satellites to be scanned during multi satellite
search. For more information about the available settings,
please read the previous chapter "Single Satellite Search".
TP List
To browse a single transponder. This search method is
helpful if you only want to save a specific channel or a
specific set of channels. You will find the corresponding
parameters (broadcasting frequencies, etc.) on the Internet
or in specific magazines.
Satellite selection
Press the W or X navigation buttons (23) to select a preset
satellite.
Press the red button (27) to edit a transponder, press the
green button (26) to add a new transponder or press the
yellow button (36) to delete the current transponder. To
browse the transponder of the selected satellite, press the
blue button (37).
Edit TP/Add TP
Frequency
Enter the frequency of the satellite transponder. Press the
numeric buttons (19) to edit the values directly or press the
W or X navigation buttons (23) to edit them step by step.
Symbol Rate
The most common symbol rates of satellite transponders
use the 27500 KS/s or 22000 KS/s values. Press the
numeric buttons (19) to edit the values directly or press the
W or X navigation buttons (23) to edit them step by step.
Polarity
Satellites broadcast signals with vertical and horizontal
polarity. Select the desired polarity H (horizontal) or V
(vertical). Note: The most common notation such as 12480H
means: Frequency 12480 MHz and H for horizontal polarity.
Select "OK" to apply the settings or select "Cancel" to
cancel.