Silvercrest SSR 1080 A1 - Manual (Page 45)

Digital HD Satellite Receiver SSR 1080 A1
English - 43
EPG Timer
To open the timer mode, in EPG overview press the green
button (26). The parameters of the highlighted programme
will be added automatically to the timer. A new window will
appear where you can customise these settings:
Timer Mode
The Timer Mode determines how often the timer will be
activated: Once, Daily, Weekly or Monthly. Select "Off" to
disable the timer completely.
Timer Service
Select "Channel" if you want to watch a specific programme.
The satellite receiver will then switch to the selected channel
at the set time. Select "Record" if you want to record the
programme on the connected USB storage device.
Wakeup Channel
Here you can set a channel to be watched or recorded after
the device is switched on.
Wakeup Date
Enter the desired power-on date via the numeric keys (19).
On Time
Enter the 4-digit start time of the programme via the numeric
keys (19).
Duration
Enter the 4-digit duration of the programme via the numeric
keys (19). For a programme that lasts 90 minutes, enter
01:30 (1 hours and 30 minutes).
While the timer is enabled, the device will not go to the energy-saving standby mode
when powering it off. This is indicated by the time shown on the display, as long as it
has not been disabled.