Epson AcuLaser C9200 Series - Manual (Page 103)

These settings are available only when the printer is in the I239X mode.
Item Settings (default in bold)
Font Courier, Prestige, Gothic, Orator, Script, Presentor, Sans serif
Pitch 10, 12, 15, 17, 20, 24 cpi, Prop.
Code Page 437, 850, 858, 860, 863, 865
T. Margin 0.30 ... 0.40 ...1.50 inches in 0.05-inch increments
Text 1 ... 67 ... 132 lines
Auto CR Off, On
Auto LF Off, On
Alt. Graphics Off, On
Bit Image Dark, Light
ZeroChar 0, (or the zero character with a slash)
CharacterSet 1, 2
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per
inch). You can also choose proportional spacing.
Code Page
Selects the character tables. Character tables contain the characters and symbols used by different
languages. The printer prints text based on the selected character table.
T. Margin
Sets the distance from the top of the page to the baseline of the first printable line. The distance is
measured in inches. The smaller the value, the closer the printable line is to the top.
Text
EPSON AcuLaser C9200 Series User's Guide
Using the Control Panel 103