Epson AcuLaser C9200 Series - Manual (Page 116)

The feed roller C2, C3, or C4 has reached the end of its service life and needs to be replaced. If this
error occurs, consult your dealer.
Replace Fuser
The fuser has reached the end of its service life and needs to be replaced. If this error occurs, consult
your dealer.
Replace Maintenance Unit
The maintenance unit has reached the end of its service life and needs to be replaced. If this error
occurs, consult your dealer.
Replace Photocon uuuu
The indicated photoconductor unit has reached the end of its service life and need to be replaced.
“Photoconductor Unit” on page 165 for instructions.
Replace Toner uuuu
The indicated toner cartridge has reached the end of its service life and need to be replaced. See
“Toner Cartridge” on page 161 for instructions.
Replace Transfer Unit
The transfer unit has reached the end of its service life and needs to be replaced. If this error occurs,
consult your dealer.
Replace Waste Toner Box
The waste toner collector has reached the end of its service life and needs to be replaced. See “Waste
Toner Collector and Filter” on page 170 for instructions.
Reserve Job Canceled
The printer cannot store the data of your print job using the Reserve Job function. The maximum
number of print jobs stored on the printer’s memory has been reached, or the memory has no more
memory available to store a new job. To store a new print job, delete a previously stored job. Also, if
you have any Confidential Jobs stored, printing those jobs will make more memory available.
You may also increase the available memory space by changing the RAM Disk setting to Normal or
Maximum
. For details, see “Setup Menu” on page 87.
EPSON AcuLaser C9200 Series User's Guide
Using the Control Panel 116