Epson AcuLaser C9200 Series - Manual (Page 112)

Invalid ROM A
The printer cannot read the installed optional ROM module. Turn off the printer, then remove the
ROM module.
Jam Paper Size Error
The paper jam occurred because the loaded paper size is different from the specified paper size.
Remove the jammed paper. See “Clearing Jammed Paper” on page 183 for instructions on removing
the jammed paper.
Maintenance Unit Needed Soon
This message indicates that the maintenance unit is near the end of its service life. You can continue
to print until the Replace Maintenance Unit message appears.
To clear this warning message and continue printing, select Clear All Warnings from the control
panel’s Reset Menu. For instruction about accessing the control panel menus, see “How to access
the control panel menus” on page 79.
Manual Feed ssss
The manual feed mode is specified for the current print job. Make sure the paper size indicated by
ssss
is loaded, then press the Start/Stop button.
Memory Overflow
The printer has insufficient memory to execute the current task. Press the Start/Stop button on the
control panel to resume printing, or press the + Cancel Job button to cancel the print job.
Need Memory
The printer has insufficient memory to complete the current print job.
To clear this error message, select Clear Warning from the control panel’s Reset Menu. See“How
to access the control panel menus” on page 79 for instructions.
To prevent this problem from recurring, add more memory to your printer as described in “Memory
modules” on page 259, or reduce the resolution of the image to be printed.
Non-Genuine Toner Cartridge
EPSON AcuLaser C9200 Series User's Guide
Using the Control Panel 112