Epson AcuLaser C9200 Series - Manual (Page 62)

4. Select the Watermark check box.
5. Select a watermark from the Watermark drop-down list.
6. If you want to make detailed settings, click Watermark Settings, and make appropriate settings.
For details about each setting, see online help.
7. Click OK.
Making a new watermark
For Windows users
1. Click the Advanced Layout tab.
2. Click New/Delete.
3. Select Text or BMP and type a name for the new watermark in the Name box.
4. If you select Text, type the watermark text in the Text box. If you select BMP, click Browse, select
the BMP file you want to use, then click Open.
5. Click Save. Your watermark will appear in the List box.
Note:
❏ To edit the saved text watermark, select it from the List box, then follow the steps 4 and 5.
❏ To remove the saved watermark, select it from the List box, then click Delete. After removing
it, be sure to click OK to close the dialog box.
6. Click OK.
Note:
❏ You can register up to 10 original watermarks.
❏ The saved watermarks can only be used with the printer driver you saved them to. Even if multiple
printer names are set for a printer driver, the settings can be available only for the printer name in
which you saved the settings.
❏ When sharing the printer on a network, you cannot create a user defined watermark at the client.
For Mac OS X 10.5 users
EPSON AcuLaser C9200 Series User's Guide
Printing Tasks 62