Epson AcuLaser C9200 Series - Manual (Page 110)

The printer is ejecting paper due to a user request. This message appears when pressing the Start/
Stop
button once to make the printer offline, then holding down the Start/Stop button for more
than 2 seconds in order not to receive form feed command.
Format Error ROM A
An unformatted ROM module has been inserted.
To clear this error, either press the Start/Stop button or turn off the printer and remove the ROM
module, then reinstall the ROM module. If that fails to clear the error, contact your dealer.
Format Required
The installed CompactFlash memory needs to be formatted to use it with the printer.
Select Yes to format the memory, or select No to cancel formatting. If you select No,
CompactFlash Error
is displayed and you cannot use the memory for the printer. In that case, turn
off the printer and remove the CompactFlash memory.
Formatting CF
The CompactFlash memory is being formatted.
Fuser Needed Soon
This message indicates that the fuser unit is near the end of its service life. You can continue to print
until the Replace Fuser message appears.
To clear this warning message and continue printing, select Clear All Warnings from the control
panel’s Reset Menu. For instruction about accessing the control panel menus, see “How to access
the control panel menus” on page 79.
Image Optimum
There is insufficient memory to print the page at the specified print quality. The printer automatically
lowers the print quality so that it can continue printing. If the quality of the printout is not acceptable,
try simplifying the page by limiting the number of graphics or reducing the number and size of fonts.
To clear this error, select Clear Warning from the control panel’s Reset Menu. See “How to access
the control panel menus” on page 79 for instructions.
Turn the Image Optimum setting off on the control panel’s Printing Menu if you do not want the
printer to automatically lower the print quality to continue printing.
EPSON AcuLaser C9200 Series User's Guide
Using the Control Panel 110