Epson AcuLaser C9200 Series - Manual (Page 168)

5. Remove the protective materials.
c
Caution:
Do not remove the protective sheet on the top.
6. Align the color marks on the photoconductor unit with those of the printer, and then insert the
photoconductor unit.
Note:
Insert the photoconductor unit without removing the protective sheet even if it gets wrinkled. If the
protective sheet comes off before inserting the photoconductor unit, remove it completely first.
EPSON AcuLaser C9200 Series User's Guide
Replacing Consumable Products 168