Epson AcuLaser C9200 Series - Manual (Page 89)

MP Mode
This setting determines whether the MP tray has the highest or lowest priority when Auto is selected
as the Paper Source setting in the printer driver. When Normal is selected as the MP Mode, the MP
tray has the highest priority as the paper source. If you select Last, the MP tray has the lowest priority.
Manual Feed
Allows you to select the manual feed mode for the MP tray.
Copies
Designates the number of copies to be printed, from 1 through 999.
Duplex
Turns duplex printing on or off. This allows you to print on both sides of a page.
Binding
Specifies the binding direction of the printout.
Start Page
Specifies whether printing starts from the front or back of the page.
Paper Type
Specifies the type of paper to be used for printing. The printer adjusts the printing speed according
to this setting. The printing speed is reduced when Thick, ExtraThk, SuperThk, or Transparency
is selected.
Page Side
Select Front when printing on the front of normal paper (Normal), thick paper (Thick), extra thick
paper (Extra Thick), super thick paper (Super Thick), or coated paper (Coated).Select Back when
printing on the back of normal paper (Normal (Back)), thick paper (Thick (Back)), extra thick paper
(Extra Thick (Back)), super thick paper (Super Thick (Back)), or coated paper (Coated (Back)).
Skip Blank Page
Enables you to skip blank pages when printing. This setting is available when you print in the ESC/
Page, ESCP2, FX, or I239X mode.
EPSON AcuLaser C9200 Series User's Guide
Using the Control Panel 89