Silvercrest SGKT 50 A1 - Manual (Page 206)

SilverCrest SGKT 50 A1
204 - English
LONG
300 ms interruption.
Press the  or  multifunction control buttons [16] to select the desired option. To save the
selected setting, press the Menu/OK button [15]. A confirmation beep will sound and the “SAVED”
message will appear for a few seconds on the display [17].
The Recall/Flash function on your handset or base allows you to use specific services
for external phone calls, e.g. “Call Waiting”. The requirement for this is that your
network provider supports this feature.
SYSTEM PIN
To change the PIN code, proceed as follows:
 After confirming by pressing the Menu/OK button [15] the message “OLD PIN-”
appears on the display [17].
 Enter the old PIN code (default 0000) and press the Menu/OK button [15] to confirm.
 “NEW PIN-” will appear on the display [17]. Enter a new PIN code and press the
Menu/OK button [15] to confirm.
 “AGAIN-” will appear on the display [17]. Enter the new PIN code again and press the
Menu/OK button [15] to confirm.
 A confirmation beep will sound and the “SAVED” message will appear for a few
seconds on the display [17].
 Please make sure you remember the PIN code or keep it in a safe place.
TIME
This menu lets you set the date and time as well as the clock format.
DATE TIME
To set the date and time, proceed as follows:
 After confirming by pressing the Menu/OK button [15] you can set the year, month, day,
hours and minutes in sequence. Enter the desired value via the numeric buttons [24].
Press the Menu/OK button [15] to confirm each entry.
 A confirmation beep will sound to confirm the completed setting and the “SAVED”
message will appear for a few seconds on the display [17].
The setting will be applied to all handsets registered with the base.