Epson 4500 User Manual
Page 186
Advertising
The Interface Boards
4.
For all interface boards except #8143 New Serial Interface board, set
the DIP switches on the interface board according to the manual
accompanying it. If you have the #8143, see page 5-50.
Attaching the interface board cover
1. Bend back the hinge plate on the interface board cover as shown
below.
Note:
When you reattach the interface board, rebend the plate to
cover the opening. The plate is sturdy, but be careful not to subject it
to excessive bending.
5-48
Using the Printer Options
Advertising