Epson 4500 - Manual (Page 265)

Commands Arranged by Topic
ESC N
Format:
ASCII code:
Decimal:
Hexadecimal:
ESC N n
27 78 n
1B 4E n
Set Skip Over Perforation
Comments:
The variable n is the number of lines skipped between the last line
printed on one page and the first line to print on the next page. For
example, with the standard setting for line spacing (1/6-inch), and
page length (66 lines), ESC N 6 prints 60 lines and then skips 6. This
setting is cancelled by ESC O, ESC C, or ESC C 0. The value of n
must be from 1 to 127.
Overrides the DIP switch setting for l-inch skip over perforation.
ESC O
Format:
ASCII code:
Decimal:
Hexadecimal:
E S C O
27 79
1B 4F
Cancel Skip Over Perforation
Comments:
Cancels the skip over perforation set by ESC N. Overrides the DIP
switch setting for l-inch skip over perforation.
LF
Format:
ASCII code: LF
Decimal : 10
H e x a d e c i m a l : 0 A
Line Feed
Comments:
When this command is received, the data in the print buffer is printed
and the paper advances one line in the current line spacing.
9-14 Command Summary