Epson 4500 User Manual
Page 73
Advertising
Printing on Special Paper
To
1.
change the paper thickness setting, follow these steps.
Make sure that the printer is turned off. Then remove the
cover.
printer
WARNING:
If the printer has just been in use,
the
print head
may be hot. Allow it to cool before touching it,
2. Select the paper thickness you want according to the table on the
following page. For normal use, the lever should always be set to
position 2 on the scale.
To help you check the position of the paper thickness lever, the
orange
MULTI-PART
light on the control panel comes on if the lever
is set to position 4 or higher.
Paper Handling
2-25
Advertising