Enterasys Networks D-Series - Manual (Page 126)

clear lldp port tx-tlv
5-30 Discovery Protocol Configuration
Defaults
None.
Mode
Switch command, read‐write.
Example
This example disables the management address, MED capability, and MED location identification
TLVs from being sent in LLDPDUs by port
ge .1.1.
D2(rw)->clear lldp port tx-tlv mgmt-addr med-cap med-loc ge.1.1
poe Disables the Power via MDI IEEE 802.3 Extensions TLV from being
transmitted in LLDPDUs. Only valid for PoE‐enabled ports.
link‐aggr Disables the Link Aggregation IEEE 802.3 Extensions TLV from being
transmitted in LLDPDUs.
max‐frame Disables the Maximum Frame Size IEEE 802.3 Extensions TLV from
being transmitted in LLDPDUs.
med‐cap Disables the LLDP‐MED Capabilities TLV from being transmitted in
LLDPDUs.
med‐loc Disables the LLDP‐MED Location Identification TLV from being
transmitted in LLDPDUs.
med‐poe Disables the LLDP‐MED Extended Power via MDI TLV from being
transmitted in LLDPDUs. Only valid for PoE‐enabled ports.
port‐string Specifies the port or range of ports to be affected.