Enterasys Networks D-Series - Manual (Page 373)

Enterasys D-Series CLI Reference 14-1
14
Logging and Network Management
This chapter describes switch‐related logging and network management commands and how to
use them.
Configuring System Logging
Purpose
To display and configure system logging, including Syslog server settings, Syslog default settings,
and the logging buffer.
Commands
Note: The commands in this chapter pertain to network management of the D-Series device from
the switch CLI only.
For information about... Refer to page...
Configuring System Logging 14-1
Monitoring Network Events and Status 14-12
Managing Switch Network Addresses and Routes 14-16
Configuring Simple Network Time Protocol (SNTP) 14-26
Configuring Node Aliases 14-34
For information about... Refer to page...
show logging server 14-2
set logging server 14-3
clear logging server 14-4
show logging default 14-4
set logging default 14-5
clear logging default 14-6
show logging application 14-6
set logging application 14-7