Show linkflap parameters output details -24, Show linkflap metrics output details -24, Examples – Enterasys Networks D-Series User Manual

Page 150

Advertising
background image

show linkflap

6-24

Port Configuration

Examples

This example shows how to display the global status of the link trap detection function:

D2(rw)->show linkflap globalstate

Linkflap feature globally disabled

This example shows how to display ports disabled by link flap detection due to a violation:

D2(rw)->show linkflap downports

Ports currently held DOWN for Linkflap violations:

None.

This example shows how to display the link flap parameters table:

D2(rw)->show linkflap parameters

Linkflap Port Settable Parameter Table (X means error occurred)

Port LF Status Actions Threshold Interval Downtime

-------- --------- ------- ---------- ---------- ----------

ge.1.1 disabled ....... 10 5 300

ge.1.2 enabled D..S..T 3 5 300

ge.1.3 disabled ...S..T 10 5 300

Table 6‐8

 provides an explanation of the show linkflap parameters command output.

This example shows how to display the link flap metrics table:

D2(rw)->show linkflap metrics

Port LinkStatus CurrentCount TotalCount TimeElapsed Violations

-------- ----------- ------------ ---------- ----------- -------------

ge.1.1 operational 0 0 241437 0

ge.1.2 disabled 4 15 147 5

ge.1.3 operational 3 3 241402 0

Table 6‐9

 provides an explanation of the show linkflap metrics command output.

Table 6-8

show linkflap parameters Output Details

Output Field

What it displays...

Port

Port designation.

LF Status

Link flap enabled state.

Actions

Actions to be taken if the port violates allowed link flap behavior.

D = disabled, S = Syslog entry will be generated, T= SNMP trap
will be generated.

Threshold

Number of link down transitions necessary to trigger the link flap
action.

Interval

Time interval (in seconds) for accumulating link down transitions.

Downtime

Interval (in seconds) port(s) will be held down after a link flap
violation.

Table 6-9

show linkflap metrics Output Details

Output Field

What it displays...

Port

Port designation.

LinkStatus

Link status according to the link flap function.

CurrentCount

Link down count accruing toward the link flap threshold.

TotalCount

Number of link downs since system start,

Advertising