Enterasys Networks D-Series - Manual (Page 304)

set diffserv class match
10-6 Differentiated Services Configuration
Parameters
every classname Matches all packets to a specific class.
dstmac | scrmac classname
macaddr macmask Matches to a specific class based on destination or source MAC
address.
dstip | srcip classname
ipaddr ipmask Matches to a specific class based on destination or source IP
address.
dstl4port | srcl4port
keyword classname
keyword | number
classname portnumber Matches to a specific class based on destination or source layer 4
port number or keyword. Valid keyword values are:
• domain
• echo
• ftp
• ftpdata
• http
• smtp
• snmp
• telnet
• tftp
• www
Valid portnumber values are 0 ‐ 65535.
ipdscp classname dscpval Matches to a specific class based on the value of the IP Diffserv
Code Point. Valid numeric or keyword values can be entered as
listed in
Table 10‐27 below.
ipprecedence classname
precedencenumber Matches to a specific class based on the value of the IP precedence
field. Valid precedencenumber values are: 0 ‐ 7.
iptos classname tosbits
tosmask Matches to a specific class based on the value of the IP type of
service (TOS) field. Valid tosbits values are 0 ‐ 255. Valid tosmask
values are 1 ‐ 8.
protocol keyword
classname protocol‐name |
number classname protocol‐
number Matches to a specific class based on number or keyword in the IP
protocol field. Valid protocol‐name keyword are:
• icmp
• igmp
• ip
• tcp
• udp
Valid protocol‐number values are 0 ‐ 255.
refclass add | remove
classname refclassname Adds or removes a set of already defined match conditions to a
specific class.
vlan classname vlanid Matches to a specific class based on VLAN ID. Valid values are 1‐
4094.