Enterasys Networks D-Series - Manual (Page 216)

set snmp notifyprofile
7-36 SNMP Configuration
Row status = active
set snmp notifyprofile
Use this command to create an SNMP notify filter profile configuration. This associates a
notification filter, created with the set snmp notifyfilter command (“
set snmp notifyfilter ” on
page 7‐34), to a set of SNMP target parameters to determine which management targets should
not receive SNMP notifications.
Syntax
set snmp notifyprofile profile targetparam targetparam [volatile | nonvolatile]
Parameters
Defaults
If storage type is not specified, nonvolatile (permanent) will be applied.
Mode
Switch command, read‐write.
Example
This example shows how to create an SNMP notify profile named area51 and associate a target
parameters entry.
D2(su)->set snmp notifyprofile area51 targetparam v3ExampleParams
clear snmp notifyprofile
Use this command to delete an SNMP notify profile configuration.
Syntax
clear snmp notifyprofile profile targetparam targetparam
Parameters
Defaults
None.
profile Specifies an SNMP filter notify name.
targetparam
targetparam Specifies an associated entry in the SNMP Target Params Table.
volatile |
nonvolatile (Optional) Specifies a storage type.
profile Specifies an SNMP filter notify name to delete.
targetparam
targetparam Specifies an associated entry in the snmpTargetParamsTable.