Enterasys Networks D-Series - Manual (Page 482)

clear eapol
17-20 Security Configuration
Parameters
Defaults
If auth‐mode is not specified, all EAPOL settings will be cleared.
If port‐string is not specified, settings will be cleared for all ports.
Mode
Switch command, read‐write.
Example
This example shows how to clear the EAPOL authentication mode for port ge .1.3:
D2(su)->clear eapol auth-mode ge.1.3
auth‐mode (Optional) Globally clears the EAPOL authentication mode.
port‐string Specifies the port(s) on which to clear EAPOL parameters. For a detailed
description of possible port‐string values, refer to “
Port String Syntax Used
in the CLI ” on page 6‐1.