Enterasys Networks D-Series - Manual (Page 305)

set diffserv class match
Enterasys D-Series CLI Reference 10-7
Defaults
None.
Mode
Switch command, read‐write.
Usage
Any policy that is applied must be composed of rules that come from only one of the following
four groups.
• Layer 3:
– Destination IP address (dstip)
– Destination Layer 4 port (dstl4port)
– IP Diffserv Code Point (ipdscp)
– IP precedence field (ipprecedence)
– IP type of service (TOS) field (iptos)
– IP protocol field (protocol)
– Source IP address (srcip)
– Source Layer 4 port (srcl4port)
• Layer 2:
– Destination MAC address (dstmac)
– Source MAC address (scrmac)
– VLAN ID (vlan)
• Layer 2 Layer 3 source:
– Source MAC address (scrmac)
– Source IP address (srcip)
– VLAN ID (vlan)
• Layer 2 Layer 3 destination:
– Destination MAC address (dstmac)
Table 10-27 Valid IP DSCP Numeric and Keyword Values
Code Point Map Numeric Value Keyword (Usage)
b'000000 0 be (best effort)
b'xxx000 0,8,16,24,32,40,48,56 cs0 - cs7 (Class Selector PHB)
b'001xx0 10,12,14 af11, af12, af13 (Assured Forwarding)
b'010xx0 18,20,22 af21, af22, af23 (Assured Forwarding)
b'011xx0 26,28,30 af31, af32, af33 (Assured Forwarding)
b'100xx0 34,36,38 af41, af42, af43 (Assured Forwarding)
b'101110 46 ef (Expedited Forwarding)