Rose Electronics Orion - Manual (Page 28)

22
Orion Installation and Operations Manual
Status Display – Network
Network functionality is in development at this time.
Status Display – Firmware
Select Firmware from the status menu and press <Return>. The firmware status display will display showing
the firmware versions of the currently installed boards in the unit.
Use the page up and page down keys to view both screens.
Press ESC to return to the Status Menu.
Diagnostic LEDs (CATx cable / Fiber cable)
A- Diagnostic LED
(Link Status, Left socket)
B- Diagnostic LED
(Link Status, Right socket)
C- Diagnostic LED
(Link Status, Left socket)
D- Diagnostic LED
(Link Status, Right socket)
LED (CATx link)
Appearance Diagnostics
Link Status (Green/Orange LED)
Green blinking Link cable connection OK
Data transmission active
Green On Link cable connection OK
No data transmission
Orange blinking Port active, no link cable connection
Off Port not active
LED (Fiber link)
Appearance Diagnostics
Link Status (Green/Orange LED)
Green blinking Port activated, signal OK
Green On Port deactivated, signal OK
Red blinking Port activated, no signal detected
Green On Port activated, module error signal
Off Port deactivated
A B
C D