Operating modes, Operating modes - overview – Rose Electronics Orion User Manual

Page 38

Advertising
background image

OPERATING MODES

32

Orion Installation and Operations Manual

Operating modes - Overview

The Orion™ provides full flexibility for configuration of your Switch environment. One part can be configured as

Single-Head Ports, another part as Dual-Head- or even Quad-Head Ports. You can also mix configurations of KVM

and USB2.0 ports.

With the “Follow-Me” function, you can copy your own display content to one or more additional monitors. If a

presentation shall be displayed concurrently on a projector

In each operating mode, the device can be controlled like a “Crosspoint Switch”’. This functionality can be used to

perform all switch activity from one single workplace or to set up specific configurations which are not allowed in

regular operating modes. This is the only possible operating mode for pure video switching environments.

Single-Head KVM switch mode

In the Single-Head Mode up to 16 users can access up to 32 CPUs. NON-Blocking Access for all users is granted,

i.e. none of the users is constrained by the activity of another user.

Single-Head KVM-Switch

Using the OSD, each user can select the CPU that he wants to connect to. The OSD display shows if the CPU has

already been assigned to another user. Depending on the switch configuration, access to this CPU Port will be

denied or the former user will be replaced by the new user.

Depending on the switch configuration, access to the OSD is possible at any time or is requiring an authentication.

With the authentication, access to CPU Ports and/or User Ports can further be restricted by assigning specific user

levels. Alternatively, the user can be assigned to one or more user groups with access to a defined set of CPU Ports

and/or User Ports.

With the “Follow-Me” function, you can copy your own display content to one or more additional monitors.

From a Single-Head User Port you might also access a Dual-Head- or Quad-Head- CPU.

Operation, however, is limited to the first monitor in this case.

Connect up to 32 computers

Connect up to 16 user stations

Advertising