Rose Electronics Orion - Manual (Page 32)

26
Orion Installation and Operations Manual
Keyboard Commands
<Cursor left> Cursor left
<Cursor right> Cursor right
<Cursor up> Line up
<Cursor down> Line down
<Tab> Next field
<Shift> + <Tab> Previous field
<SPACE> Select CPU Port Video only
(Only if “Allow Sharing“ active or CPU available)
<RETURN> Select CPU Port Video and Control
<F1> Select “KWM-Switch“ Mask
<F2> Select “Follow Me“ Mask
<ESC> Back to upper Menu
Follow-Me function
The Follow Me function allows you to display the contents of your monitor to one or more CON ports.
Pressing the <F2> key from the KVM-List or KVM-Switch menu will display the below screen. The Follow Me
display shows the current connection status. Select the CON ports to display your monitor on and press
<RETURN>. The display of the computer you are connected to will display on the CON monitors you have selected.
If you switch CPU ports, the FOLLOW ME connections will also switch and display the video from the new CPU port.
Figure 19. Follow Me mask
The CPU_xx and CON_xx listing provide you information about the connection by using the following color scheme.
CPU Port CON Port Description
Green n.c Available CON port
Red Red CON Port # connected to PCU Port # or to CON Port # in “Follow-Me” mode
Black Black Own CON port connection
Black n.c CON Port not available
With a mouse or Touch screen
the user can select a CPU Port
Video only if the CPU Port is
already connected to another
Console and neither “Force
Connect“ nor “Force Disconnect“
have been selected. In all other
he will have full control of the
selected CPU port.