TA Triumph-Adler P-4030 MFP - Manual (Page 113)

3-15
Preparation before Use > Loading Paper
Specifying Paper Size and Media Type
The default paper size setting for cassette 1, for the multi purpose tray and for the optional paper feeder (cassettes 2 to
5) is "A4" or "Letter", and the default media type setting is "Plain".
To change the type of paper to be used in cassettes, specify the paper size and media type setting. (Refer to Specifying
Paper Size and Media Type for the Cassettes on page 3-15 .) To change the type of paper to be used in multi purpose
tray, specify the paper size and media type setting. (Refer to Specifying Paper Size and Media Type for the Multi
Purpose Tray (MP Tray Setting) on page 3-17 .)
Specifying Paper Size and Media Type for the Cassettes
Specify the paper size and media type of paper to be used in cassettes.
1 Display the screen.
1 Press the [ System Menu/Counter ] key.
2 Press the [ ▲ ] or [ ▼ ] key to select [Common Settings], and press the [ OK ] key.
Selection Item Selectable Size/Type
Cassette 1 (to 5) Size
*1
*1 Only set this when the size dial on the cassette is set to “Other”.
Available options are as follows:
Value
Cassette 1: A4, A5, B5, Folio, 216 × 340 mm, Letter, Legal, Statement, Executive, Oficio II, 16K,
ISO B5, Envelope C5, Custom
Cassettes 2 to 5: A4, A5, B5, B6, Folio, 216 × 340 mm, Letter, Legal, Statement, Executive,
Oficio II, 16K, ISO B5, Envelope #10, Envelope #9, Envelope #6, Envelope Monarch,
Envelope DL, Envelope C5, Oufuku Hagaki, Youkei 4, Youkei 2, Custom
Cassette 1 (to 5) Type *2
*2 To change to a media type other than Plain, refer to MP Tray Set. (MP Tray Settings) on page 8-22 . When a paper weight that
cannot be loaded in the cassette is set for a media type, that media type does not appear.
Select the media type.
Value
Cassette 1: Plain (60 to 105 g/m 2 ), Rough, Recycled, Preprinted *3 , Bond, Color, Prepunched *3 ,
Letterhead *3 , High Quality, Custom 1 - 8
Cassettes 2 to 5: Plain (60 to 105 g/m 2 ), Rough, Recycled, Preprinted *3 , Bond, Color,
Prepunched *3 , Letterhead *3 , Envelope, High Quality, Custom 1 - 8
*3 To print on preprinted or prepunched paper or on letterhead, refer to SpcialPaper Act. on page 8-21 .
NOTE
• The available media types for printing received faxes are as shown below.
Plain, Recycled, Bond, Color, Envelope, Thick, High Quality, Rough and Custom 1 to 8
• Set the paper size of the cassette used for fax reception as follows:
Inch models: Letter, Legal, Statement
Metric models: A4, B5, A5, Folio
If the above setting is changed, it will not be possible to print faxes.
2 1
Sys. Menu/Count.:
User/Job Account
Exit
04
User Property 05
Common Settings 06