Change the user properties – TA Triumph-Adler P-4030 MFP User Manual
Page 297
9-10
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
2
Change the user properties.
1
Adding a User (Local User List)
to change a user property.
Item
Description
User Name
Changes the name shown on the user list. Up to 32 characters can be
entered.
Login User Name
Displays the login user name that is entered at login.
Login Password
Changes the password that is entered at login and press the [
OK
] key. Up
to 64 characters can be entered. Reenter the same password for
confirmation and press the [
OK
] key.
E-mailAddress
Changes the user's e-mail address. Up to 128 characters can be entered.
NOTE
This cannot be changed for network authentication.
Access Level
Displays the user's access level.
Account Name
Displays the account where the user belongs.
ID Card Info.
Displays the ID card information of the logged in user.
NOTE
This function is displayed when the optional ID Card Authentication Kit is
activated.
Card Authentication Kit(B) "Card Authentication Kit" (page 11-3)
This function does not appear when the server type is set to [Ext.] in
Network Authentication, and logged in with the user account certificated
in the server specified as the [Ext.] server type.
Group Name
Displays the name displayed on the group list.
NOTE
This function does not appear when group authorization is set to [Off].
This function does not appear when the server type is set to [Ext.] in
Network Authentication, and logged in with the user account certificated
in the server specified as the [Ext.] server type.
Group ID
Displays the ID displayed on the group list.
NOTE
This function does not appear when group authorization is set to [Off].
This function does not appear when the server type is set to [Ext.] in
Network Authentication, and logged in with the user account certificated
in the server specified as the [Ext.] server type.
User Property:
1/11
User Name:
Edit
User 01