Responding to messages, Responding to messages -15 – TA Triumph-Adler P-4030 MFP User Manual
Page 340
10-15
Troubleshooting > Troubleshooting
Responding to Messages
If a problem has occurred in the machine, you will be notified by the following display.
• The [
Attention
] indicator on the operation panel is lit or flashing.
• An error message appears in the message display of the machine's operation panel.
A
B
NOTE
When contacting us, the serial number will be necessary. To check the serial number, refer to
Equipment's Serial Number on page 5-5
Message
Checkpoints
Corrective Actions
Reference
Page
Add toner.
Toner is empty.
Replace the toner container.
Account error.
—
Failed to specify Job Accounting
when processing the job externally.
The job is canceled. Press the [
OK
]
key.
—
Message
Checkpoints
Corrective Actions
Reference
Page
Box is not found.
Job is canceled.
—
The specified box cannot be found.
Job is canceled. Press the [
OK
] key.
—
Box limit exceeded. Job is
canceled.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details on
Auto Error Clear, refer to
Is [OK] displayed on the screen?
The specified box is full, and no
further storage is available; Job is
canceled. Press the [
OK
] key. Try to
perform the job again after printing
or deleting data from the box.
—
Add toner.
Help