TA Triumph-Adler P-4030 MFP - Manual (Page 64)

2-22
Installing and Setting up the Machine > Energy Saver function
2 Press the [ ▲ ] or [ ▼ ] key to select [Common Settings], and press the [ OK ] key.
3 Press the [ ▲ ] or [ ▼ ] key to select [Timer Setting], and press the [ OK ] key.
4 Press the [ ▲ ] or [ ▼ ] key to select [Sleep Level], and press the [ OK ] key.
2 Select the Sleep level.
Press the [ ▲ ] or [ ▼ ] key to select [Quick Recovery] or [Energy Saver], and press the [ OK ] key.
When [Energy Saver] is set, next go on to set whether or not to use Energy Saver mode for
each function.
3 Set the Sleep rule.
1 Press the [ ▲ ] or [ ▼ ] key to select the function to be set, and press the [ OK ] key.
[Card Reader] is displayed when the optional Card Authentication Kit is installed.
[FAX] is displayed only on products with the fax function installed.
2 Press the [ ▲ ] or [ ▼ ] key to select [Off] or [On], and press the [ OK ] key.
Repeat steps 3-1 to 3-2 to set for a different function.
2 1
Sys. Menu/Count.:
User/Job Account
Exit
04
User Property 05
Common Settings 06
2 1
Common Settings:
Date Setting
Exit
08
Timer Setting 10
Error Handling
09
2 1
Timer Setting:
PanelReset Timer
Exit
02
Sleep Level
03
04
Low Power Timer
Sleep Level:
Quick Recovery
Exit
01
Energy Saver 02
*
2 1
2 1
Energy Saver:
Network 01
Card Reader 02
FAX 03
Exit
2 1
Network:
Off 01
On 02 *