PLANET VIP-254NT - Manual (Page 22)

22
- +: It means as “or”. For example, [123+456+334+5xx] even if [123
or 456 or 334 or 5xx]
- x: It is equal to 0~9. For example, [5xx] even if the number begin
5.
Dial Now If the dialing number are match with this field, it will dial out and need
not to press the “#” key to end the dialing. It accepts the numeral or
symbol, and the max length are 124.
LNote: The starting number can’t be the “0”. For example, if the
number is “0xxxx”, because the starting number is “0”, so that the
system will ignore this dial plan.
Realm 1~5 prefix These options can define the switching code for each Realm No.
Auto Dial Time Stop dialing after seconds then send dial number out.
Use # as send key If setup as Yes, the system sill stop to receive the dialing number
when receive the [#] key. The system also will to determine the Auto
Dial Time, it will carry out the calling if there isn’t receive the digit after
the Auto Dial Time.
If setup as No, the system just according to the Auto Dial Time to
determine the end time.
Auto PSTN backup Disable Auto PSTN backup options for the phone default. When
you set Enable Auto PSTN backup,if the phone registration failed,then
the phone is automatically switched PSTN-side. So that you can hear
tone from PSTN when pick up the handset.
PSTN feature code Besides press the “PSTN / IP” button, it also could dial this number will
switch from IP to PSTN mode.
Routing Type To select use IP or FXO types for auto routing function, and according
to the Routing rule to handle the dialing numbers.
Routing rule The rule can delete the prefix number.
Descriptions of example:
Example_1: Routing to: FXO, Routing rule: 007+009
1. If the dialing number is
“00722199518”, it will send the full number for dialing out via FXO port.
The real dialing number is [ 00722199518 ].
2. If the dialing number is
“00922199518”, it will send the full number for dialing out via FXO port.
The real dialing number is [ 00922199518 ].
Example_2: Drop prefix: No, Replace rule 1: 002, +: 1234+4321 (No limit the digit length)
1. If the dialing number is start as
“1234”, it will add the 002 at begin. The real dialing number is
[ 0021234
…
].
2. If the dialing number is start as
“4321”, it will add the 002 at begin. The real dialing number is
[ 0024321
…
].