PLANET VIP-254NT - Manual (Page 30)

30
NAT Settings
This page defines the PC setting in this page.
Field Description
LAN Mode The default is Bridge mode, and it also provides NAT mode.
- Bridge: When set as is mode, the WAN and LAN ports are in
the same network segment.
- NAT: The WAN and LAN ports are in the different network
segment, and LAN port could enable the DHCP Server function
to allot the IP address.
LAN IP Address The IP address of LAN port. (In the Bridge mode, the Default IP:
192.168.123.1)
LAN MAC ID The MAC of LAN port
DHCP Server Active It will allot the IP address automatically when enabke this function.
Assign IP Start and end IP of lease table. Network device connecting to the
LAN port can dynamic obtain the IP in the range between start IP
and end IP
Lease Time DHCP server lease time