If you forget the password, Entering the password recall procedure, Changing the password – BenQ TH670s User Manual
Page 32
Operation
32
If you forget the password
If the password function is activated, you will be
asked to enter the six-digit password every time
you turn on the projector. If you enter the wrong
password, the password error message as pictured
to the right displays lasting for three seconds, and
the message ‘Input Current Password’ follows.
You can retry by entering another six-digit
password, or if you did not record the password in this manual, and you absolutely do
not remember it, you can use the password recall procedure. See
password recall procedure" on page 32
for details.
If you enter an incorrect password 5 times in succession, the projector will
automatically shut down in a short time.
Entering the password recall procedure
1.
Press and hold AUTO on the
projector or remote control for 3
seconds. The projector will display a
coded number on the screen.
2.
Write down the number and turn off
your projector.
3.
Seek help from the local BenQ service center to decode the number. You may
be required to provide proof of purchase documentation to verify that you are
an authorized user of the projector.
Changing the password
1.
Open the OSD menu and make sure the Menu Type is Advanced. See
for details.
2.
Go to the System Setup: Advanced > Password > Change Password
menu, and press OK on the projector or remote control.
3.
The message ‘Input Current Password’
displays.
4.
Enter the old password.
•
If the password is correct, another
message 'Input New Password' displays.
•
If the password is incorrect, the password
error message displays lasting for three
seconds, and the message 'Input Current
Password' displays for your retry. You can
press BACK on the projector or the
remote control to cancel the change or
try another password.
5.
Enter a new password.
IMPORTANT: The digits being input will display as asterisks on-screen. Write your
selected password down here in this manual in advance or right after the password
is entered so that it is available to you should you ever forget it.
Password: __ __ __ __ __ __