Canon EOS 80D - Manual (Page 452)

452
You can check the condition of the battery you are using on the LCD
monitor. Each Battery Pack LP-E6N/LP-E6 has a unique serial number,
and you can register multiple batteries to the camera. When you use
this feature, you can check the registered batteries’ remaining capacity
and operation history.
Select [Battery info.].
 Under the [53] tab, select [Battery
info.], then press <0>.
 The battery info. screen will appear.
3
Checking the Battery Information
Battery model or household power source
being used.
The battery level indicator (p.42) is
displayed together with the remaining
battery level shown in 1% increments.
The number of shots taken with the current
battery. The number is reset when the
battery is recharged.
Battery’s recharge performance level is
displayed in one of three levels.
(Green) : Battery’s recharge
performance is fine.
(Green) : Battery’s recharge performance
is slightly degraded.
(Red) : Purchasing a new battery is
recommended.
Battery position
Using a genuine Canon Battery Pack LP-E6N/LP-E6 is recommended. If
you use batteries that are not genuine Canon products, this camera’s full
performance may not be attained or malfunction may result.
 The shutter count is the number of still photos taken. (Movies are not
counted.)
 The battery information will also be displayed when Battery Pack LP-
E6N/LP-E6 is used with Battery Grip BG-E14 (sold separately). If AA/R6
batteries are used, only the remaining battery level will be displayed.
 If a battery communication error message is displayed, follow the
message.