BenQ SW321C 32" 16:9 4K HDR IPS Photo and Video Editing Monitor - Manual (Page 24)

24 How to assemble your monitor hardware
3. Connect the audio cable.
You may connect headphones to the headphone jack
found on the back side of the monitor.
4. Connect USB devices.
To Connect the USB Type-B Cable
Connect the USB cable between the PC and the
monitor (via the upstream USB port at the back). This
upstream USB port transmits data between the PC and
the USB devices connected to the monitor.
Connect USB devices via other USB ports
(downstream) on the monitor. These downstream USB
ports transmit data between connected USB devices
and the upstream port.
The USB hubs (downstream ports) are available when either
the USB Type-B or Type-C™ port is in use.
5. Connect the memory card.
Insert an SD or MMC memory card following the
direction indicated on the card to exchange files.
Supported memory card formats are as follows:
•SD / SDHC / SDXC
•MMC
6. Connect the Hotkey Puck G2 to the
monitor.
Connect the Hotkey Puck G2 to the mini USB port
(exclusively for Hotkey Puck connection) on the rear of
the monitor.
TV OUT
PDI
F- OU
T SDIF- O U T