Portrait installation, Prepare for the shading hood installation, Install the right hoods – BenQ SW321C 32" 16:9 4K HDR IPS Photo and Video Editing Monitor User Manual
Page 31
31
How to assemble your monitor hardware
Portrait installation
Plates required for portrait installation:
7. If you intend to calibrate the display’s color
by a colorimeter, slide to open the cover on
the top plate so the colorimeter can be
installed.
Follow the instruction manuals of the colorimeter you
purchased and the provided software (e.g.,
Palette Master
Element
) to complete the installation and calibration
process.
L2
Lt
R2
Rt
L1
R1
top plate
1. Prepare for the shading hood installation.
Place the monitor upright on its stand on a flat even
surface. Make sure the monitor is rotated to the
portrait mode as instructed in
Follow the illustrations to complete the installation
carefully.
2. Install the right hoods.
Align the arrow on plate (R1) with the one on plate (R2)
and attach them together. Slide plate (R2) to the end as
illustrated.
Align the arrow on plate (Rt) with the one on plate (R1)
and attach them together. Slide plate (R1) along with
plate (R2) to the end as illustrated.
R2
Rt
R1