Hensel Certo 400 Monolight - Manual (Page 10)

Safety
10
Prevention of equipment damage and malfunctions
Prevention of equipment damage due to fogging
Fogging can occur due to a sudden temperature change, e.g. in a new
environment.
 Always let the device acclimatize before use in a new environment.
Prevention of equipment damage due to rain, vapors, frost, heat,
humidity and dust
Rain, vapors, frost, heat, humidity and dust can damage the device.
 Protect the device against dripping and spraying water (e.g. rain) or
vapors.

Protect the device against frost, heat and high humidity.
 Do not place containers of liquids on the device.
 Make sure that neither the device nor its components are standing or
lying on wet ground.
 Do not store the device in locations exposed to heat or moisture.

Cover the device with suitable dust protection when it is not in
operation.
Prevention of equipment damage when using external products
The use of the device in combination with external products can lead to
equipment damage.

Use the device only with accessories and original spare parts
recommended by the manufacturer.
Malfunctions due to electromagnetic radio signals
The device transmits and receives electromagnetic radiation in a frequency
range from 2.3995 to 2.4745 GHz according to IEEE 802.11 n. The
maximum transmission power is 100 mW. The power, range and reliability
can be impaired by other radio systems or the device can cause
interference in other radio systems, such as radio telephones (cell phones,
cordless telephones), Wi-Fi routers, radio and TV stations or medical
devices.
 Before using the device in sensitive environments, such as hospitals,
make sure that use is permitted there.