Hensel Certo 400 Monolight - Manual (Page 24)

Mounting and removing components of
the device
24
Mounting and removing components of the
device
IMPORTANT!
The device can be damaged if external products are used.
 Use only original spare parts and accessories from the
manufacturer.
Removing and installing the transport cap
WARNING
Heat is generated during the operation of the device, which
can lead to a fire if the transport cap is in place.
 Always remove the transport cap before use.
To remove the transport cap from the device, proceed as follows:

Hold the transport cap firmly.
 Press the lock on the device (1) against the spring force to the limit stop.
 Remove the transport cap (3).

Guide the lock (1) into the starting position using the spring force.