Hensel Certo 400 Monolight - Manual (Page 49)

Servicing the device
49
Replacing a defective fuse of the mains connection
To replace the fuse of the mains connection, proceed as follows:

Switch off the device at the main switch.

Remove the mains cable (see page 31).
 Open the fuse holder (1) with a small screwdriver or similar tool and pull
it out.
The fuse holder (1) contains two fuses: the blown fuse and the spare fuse.
 Remove the blown fuse.
 Insert a new spare fuse into the fuse holder.

Carefully push the fuse holder (1) into the housing again until it engages
in a flush manner.
Remember to insert a new spare fuse as soon as possible.