VARI-LITE VL6000 Beam - Manual (Page 65)

O PERATION : U PDATING S OFTWARE
3
02.9708.0002 27 April 2017 47
Troubleshooting
Upload Cable LED Status Messages
Figure 3-6: USB Upload Cable
Upload Cable Warning (Error) Message
If you see a warning message (as shown in Figure 3-7 ) on your
computer screen and the USB Upload Cable is properly connected to
USB 2.0 compatible port on your computer, it may not be detected by
your computer.
•
Disconnect USB Upload Cable from computer and reconnect.
• Reinstall USB Upload Cable Driver as described in, “Installing
PEGASUS Software” .
If either of the these do not resolve the error message, you may have a
defective Upload Cable. Contact customer service at 1.214.647.7880
or
[email protected] for assistance.
Table 6: USB Upload Connector LED Colors
XLR LED Status Meaning
Continuous Red
Do not use the cable to download software; contact
customer service for assistance.
Continuous Purple Driver software is not installed.
Continuous Blue with Purple
pulse every five seconds.
Cable is ready, but data is not being transmitted.
Flashing Blue (twice per
second)
Data is being transmitted.
LED
USB Upload
Cable
Figure 3-7: Upload Cable
Error Message