VARI-LITE VL6000 Beam - Manual (Page 91)

T ROUBLESHOOTING AND M AINTENANCE
A
02.9708.0002 27 April 2017 73
Step 6. Remove replacement lamp from shipping box.
Step 7. As shown in
Figure A-2 , align replacement lamp tabs with lamp socket.
Figure A-2: Lamp Installation
Step 8. Install lamp fully into lamp socket, taking care not to touch lamp glass.
Step 9. Turn lamp clockwise to seat lamp into socket. Lamp base should be aligned as illustrated in
Figure A-3 .
Figure A-3: Installed Lamp
Step 10. Reinstall lamp socket cover. Make sure safety tether is completely encapsulated within lamp
socket cover.
Step 11. Disengage tilt lock to allow luminaire head to move freely.
Step 12. Align lamp as described in
“Align Lamp For Maximum Beam Irradiance” on page 21 .
Lamp Socket Cover
Lamp*
Align tabs of lamp with
socket when installing
Note alignment of fully seated lamp
Lamp
Caution: Ensure lamp is
completely seated before
reinstalling lamp socket cover..