VARI-LITE VL6000 Beam - Manual (Page 75)

M ENU S YSTEM : M ENU O PERATION
4
02.9708.0002 27 April 2017 57
Menu Tree
Figure 4-3 and Figure 4-4 on page 58 are graphical representations of the menu system.
Figure 4-3: Menu Tree Part 1
Address - value (1 thru 489) DMX Data** Ch 1 - Intensity XXX (Value)
Ch 2 - Pan High Byte XXX (Value)
Ch 3 - Pan Low Byte XXX (Value)
Ch 4 - Tilt High Byte XXX (Value)
Ch 5 - Tilt Low Byte XXX (Value)
Ch 6 - Edge XXX (Value)
Ch 7 - Color Presets/ Splits/ Actives
Ch 8 - CTG
Ch 9 - Col Whl 1 XXX (Value)
Ch 10 - Col Whl 1 Ctrl XXX (Value)
Ch 11- Col Whl 2 XXX (Value)
Ch 12- Col Whl 2 Ctrl XXX (Value)
Ch 13- Col Whl 3 XXX (Value)
Ch 14- Col Whl 3 Ctrl XXX (Value)
Ch 15- Gobo Whl 1 XXX (Value)
Ch 16- Gobo 1 Indx High XXX (Value)
Ch 17- Gobo 1 Indx Low XXX (Value)
Ch 18- Gobo 1 Ctrl XXX (Value)
Ch 19- Iris XXX (Value)
Ch 20- Frost XXX (Value)
Ch 21- Strobe Speed XXX (Value)
Ch 22- Strobe Ctrl XXX (Value)
Ch 23- Luminaire Ctrl XXX (Value)
Notes:
*CTG=Cloaked Transition Generator
*Factory default setting.
**Channel and Dimmer information displayed simultaneously.
***Reboots entire fixture including processor.
Configure
Pan / Tilt Movement Enable
Disable
Display
On Time Auto
30 Sec
5 Min
10 Min
Change Luminaire ID ######
Reset Defaults Are you sure?
Lamp Power
Lamp Hours
On*
# of hours
Reset Lamp
Hours
Are you sure?
Head Motors
Off
Power Up
Lamp On
Lamp Off*
Cal On
Movement Enable
Disable
Orientation Auto
Up
Down
On
Pan/Tilt Swap Pan/Tilt
Invert Pan
Off*
On
Off*
On
Invert Tilt Off*
On
DMX Map 16-bit Enh*
16-bit
Fixture Status Fixture OK... or displays a list of
errors encountered during
calibration process or operation.
ReCalibrate Fixture Are you sure?
Service #
Luminaire ID ######
Software Version MM/DD/YY HH:MM
Fixture Hours XXXXXX Hours
ReBoot Fixture*** Are you sure?
Crossload Software Send
Sending Version
XX/XX/XX XX:XX
Crossload
Complete
Diagnostics Ballast Info
Fan Check
Board Check
Debug
USB Update OS
Log File Download
Reset
Cloud Search Enable
Disable
Save Config
Restore Config